东华大学学报（自然科学版）

参考文献

[1] WAMBUA P,IVENS J,VERPOEST I.Natural fibres:can they replace glass in fibre reinforced plastics?[J].Composites Science and Technology,2003,63(9):1259-1264.

[2] 关博文，张代军，王成博，等.基于FDM的连续纤维增强复合材料3D打印技术研究进展 [J].复合材料科学与工程，2025(11):145-152.GUAN B W,ZHANG D J,WANG C B,et al.Research progress on 3D printing technology of continuous fiber reinforced composites based on FDM [J].Composites Science and Engineering,2025(11):145-152.

[3] WAN X,LUO L,LIU Y J,et al.Direct ink writing based 4D printing of materials and their applications [J].Advanced Science,2020,7(16):2001000.

[4] WU J J,GUO J,LINGHU C H,et al.Rapid digital light 3D printing enabled by a soft and deformable hydrogel separation interface [J].Nature Communications,2021,12:6070.

[5] GAO Y,XU L,ZHAO Y,et al.3D printing preview for stereo-lithography based on photopolymerization kinetic models [J].Bioactive Materials,2020,5(4):798-807.

[6] ZUO H,LIU Z H,ZHANG L Z,et al.Self-healing materials enable free-standing seamless large-scale 3D printing [J].Science China Materials,2021,64(7):1791-1800.

[7] LI N Y,LINK G,WANG T,et al.Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures [J].Composites Part B:Engineering,2020,182:107612.

[8] FIJUL KABIR S M,MATHUR K,SEYAM A M.A critical review on 3D printed continuous fiber-reinforced composites:History,mechanism,materials and properties [J].Composite Structures,2020,232:111476.

[9] SCHMIDT L.21st century sports[M].Springer,2020.

[10] HORVATH J,CAMERON R.Mastering 3D printing[M].Apress,2020.

[11] LIU Z,SONG K,GAO B,et al.Microstructure and mechanical properties of Al2O3/ZrO2 directionally solidified eutectic ceramic prepared by laser 3D printing [J].Journal of Materials Science & Technology,2016,32(4):320-325.

[12] WANG C,HUANG W,ZHOU Y,et al.3D printing of bone tissue engineering scaffolds [J].Bioactive Materials,2020,5(1):82-91.

[13] HAIBE A A,VEMUGANTI S.Flexural response comparison of nylon-based 3D-printed glass fiber composites and epoxy-based conventional glass fiber composites in cementitious and polymer concretes [J].Polymers,2025,17(2):218.

[14] RANEY J R,COMPTON B G,MUELLER J,et al.Rotational 3D printing of damage-tolerant composites with programmable mechanics [J].Proceedings of the National Academy of Sciences of the United States of America,2018,115(6):1198-1203.

[15] LI T T,CHEN Y Y,WANG L F.Enhanced fracture toughness in architected interpenetrating phase composites by 3D printing [J].Composites Science and Technology,2018,167:251-259.

[16] MUKHTARKHANOV M,PERVEEN A,Talamona D.Application of stereolithography based 3D printing technology in investment casting [J].Micromachines,2020,11(10):946.

[17] MELCHELS F P W,FEIJEN J,GRIJPMA D W.A review on stereolithography and its applications in biomedical engineering [J].Biomaterials,2010,31(24):6121-6130.

[18] LI W L,WANG M,MA H L,et al.Stereolithography apparatus and digital light processing-based 3D bioprinting for tissue fabrication [J].iScience,2023,26(2):106039.

[19] LUPONE F,PADOVANO E,CASAMENTO F,et al.Process phenomena and material properties in selective laser sintering of polymers:a review [J].Materials,2022,15(1):183.

[20] KOLOSSOV S,BOILLAT E,GLARDON R,et al.3D FE simulation for temperature evolution in the selective laser sintering process [J].International Journal of Machine Tools and Manufacture,2004,44(2/3):117-123.

[21] MA F,ZHANG H,HON K K B,et al.An optimization approach of selective laser sintering considering energy consumption and material cost [J].Journal of Cleaner Production,2018,199:529-537.

[22] MAZZOLI A.Selective laser sintering in biomedical engineering [J].Medical & Biological Engineering & Computing,2013,51(3):245-256.

[23] 龙昱，李岩，付昆昆.3D打印纤维增强复合材料工艺和力学性能研究进展 [J].复合材料学报，2022,39(9):4196-4212.LONG Y,LI Y,FU K K.Recent advances in 3D printed fiber reinforced composites:Processing technique and mechanical performance [J].Acta Materiae Compositae Sinica,2022,39(9):4196-4212.

[24] RAJAN K,SAMYKANO M,KADIRGAMA K,et al.Fused deposition modeling:process,materials,parameters,properties,and applications [J].The International Journal of Advanced Manufacturing Technology,2022,120(3):1531-1570.

[25] MOHAMED O A,MASOOD S H,BHOWMIK J L.Optimization of fused deposition modeling process parameters:a review of current research and future prospects [J].Advances in Manufacturing,2015,3(1):42-53.

[26] 明越科，王奔，周晋，等.基于3D打印的连续纤维增强热固性复合材料性能及其应用探索 [J].航空制造技术，2021,64(15):58-65.MING Y K,WANG B,ZHOU J,et al.Performance and applications of 3D printed continuous fiber-reinforced thermosetting composites [J].Aeronautical Manufacturing Technology,2021,64(15):58-65.

[27] DING S L,ZOU B,WANG P,et al.Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM [J].Polymer Testing,2019,78:105948.

[28] DOU H,CHENG Y Y,YE W G,et al.Effect of process parameters on tensile mechanical properties of 3D printing continuous carbon fiber-reinforced PLA composites [J].Materials,2020,13(17):3850.

[29] COPPOLA B,CAPPETTI N,DI MAIO L,et al.Influence of 3D printing parameters on the properties of PLA/clay nanocomposites [J].AIP Conference Proceedings,2018,1981:020064.

[30] TIAN X Y,LIU T F,YANG C C,et al.Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites [J].Composites Part A:Applied Science and Manufacturing,2016,88:198-205.

[31] GENG P,ZHAO J,WU W Z,et al.Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament [J].Journal of Manufacturing Processes,2019,37:266-273.

[32] WU W Z,GENG P,LI G W,et al.Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS [J].Materials,2015,8(9):5834-5846.

[33] PAPPAS J M,THAKUR A R,LEU M C,et al.A comparative study of pellet-based extrusion deposition of short,long,and continuous carbon fiber-reinforced polymer composites for large-scale additive manufacturing [J].Journal of Manufacturing Science and Engineering,2021,143(7):071012.

[34] 任佳军，孙颖，鞠博文，等.纤维增强热塑性复合材料3D打印研究进展 [J].复合材料科学与工程，2023(11):122-128.REN J J,SUN Y,JU B W,et al.Research progress in 3D printing of fiber-reinforced thermoplastic composites [J].Composites Science and Engineering,2023(11):122-128.

[35] MING Y K,ZHANG S Q,HAN W,et al.Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites [J].Additive Manufacturing,2020,33:101184.

[36] DONG J H,DING H X,WANG Q,et al.A 3D-printed scaffold for repairing bone defects [J].Polymers,2024,16(5):706.

[37] UEDA M,KISHIMOTO S,YAMAWAKI M,et al.3D compaction printing of a continuous carbon fiber reinforced thermoplastic [J].Composites Part A:Applied Science and Manufacturing,2020,137:105985.

[38] ICHIHARA N,OHNO S,UEDA M,et al.High axial compressive strength in 3D-printed continuous carbon fiber reinforced thermoplastics by controlling printing forces [J].Composites Part B:Engineering,2025,291:112052.

[39] EL-JAKL M,LABERGE LEBEL L.Fibre waviness reduction in thermoplastic pultrusion by using DREF yarns [J].Composites Part B:Engineering,2025,288:111908.

[40] NAWAFLEH N,CELIK E.Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance [J].Additive Manufacturing,2020,33:101109.

[41] MONTICELI F,NEVES R,ORNAGHI H,et al.Prediction of bending properties for 3D-printed carbon fibre/epoxy composites with several processing parameters using ANN and statistical methods [J].Polymers,2022,14(17):3668.

[42] 明越科，段玉岗，王奔，等.高性能纤维增强树脂基复合材料3D打印 [J].航空制造技术，2019,62(4):34-38.MING Y K,DUAN Y G,WANG B,et al.3D printing for high performance fiber reinforced polymer composites [J].Aeronautical Manufacturing Technology,2019,62(4):34-38.

[43] TEKLAL F,DJEBBAR A,ALLAOUI S,et al.A review of analytical models to describe pull-out behavior-Fiber/matrix adhesion [J].Composite Structures,2018,201:791-815.

[44] TIAN X Y,TODOROKI A,LIU T F,et al.3D printing of continuous fiber reinforced polymer composites:development,application,and prospective [J].Chinese Journal of Mechanical Engineering:Additive Manufacturing Frontiers,2022,1(1):100016.

[45] 田小永，刘腾飞，杨春成，等.高性能纤维增强树脂基复合材料3D打印及其应用探索 [J].航空制造技术，2016,59(15):26-31.TIAN X Y,LIU T F,YANG C C,et al.3D printing for high performance fiber reinforced polymer composites and exploration on its applications [J].Aeronautical Manufacturing Technology,2016,59(15):26-31.

[46] SONG Y Z,GHAFARI Y,ASEFNEJAD A,et al.An overview of selective laser sintering 3D printing technology for biomedical and sports device applications:Processes,materials,and applications [J].Optics & Laser Technology,2024,171:110459.

[47] YAO X H,LUAN C C,ZHANG D M,et al.Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring [J].Materials & Design,2017,114:424-432.

[48] GUAN T R,ZHU J X,CHEN Z F,et al.Effect of shallow straight-joint braided fabric geometrical parameters on fiber volume fraction [J].Science and Engineering of Composite Materials,2012,19(2):139-144.

[49] 杨来侠，刘波，刘腾飞，等.3D打印连续纤维增强聚碳酸酯复合材料预浸丝制备与性能 [J].复合材料学报，2023,40(10):5654-5665.YANG L X,LIU B,LIU T F,et al.Preparation and properties of 3D printing continuous fiber reinforced polycarbonate composite prepreg filaments [J].Acta Materiae Compositae Sinica,2023,40(10):5654-5665.

[50] CHENG P,PENG Y,LI S X,et al.3D printed continuous fiber reinforced composite lightweight structures:a review and outlook [J].Composites Part B:Engineering,2023,250:110450.

[51] LECHOWICZ P,KOSZALKA L,POZNIAK-KOSZALKA I,et al.Path optimization in 3D printer:Algorithms and experimentation system [C]//2016 4th International Symposium on Computational and Business Intelligence (ISCBI).Olten,Switzerland.IEEE,2016:137-142.